Crusader Iron Filter
Problem Water Filtration System
Addresses iron, manganese, and hydrogen sulfide in water at flow rates of up to 30 gpm.
Water can contain Iron (Fe), Manganese (Mn), and Hydrogen Sulfide (H2S). Soluble iron and manganese are oxidized and precipitated by contact with higher oxides of manganese on the proprietary blend of oxidation media. Hydrogen Sulfide is oxidized into an insoluble sulfur precipitate. Precipitates are filtered, retained, and then removed by vigorous back-washing. When the oxidizing capacity of the media is exhausted, the system has to be regenerated with a weak potassium permanganate (KMnO4) solution. 1.5 – 2 Oz. of KMnO4 per cubic foot of media is generally required for proper regeneration.
Simple & Effective Iron Reduction
The Crusader Iron Filter incorporates proprietary filtration media and is capable of removing iron, manganese, and hydrogen sulfide in water.
Proprietary Media
This media is specially formulated using a lightweight, synthetic granular core, which is coated with manganese dioxide. This system also comes with FDA-approved gravel underbedding to ensure uniform flow and consistent performance
Regenerant System Included
Regenerant refill is automatically controlled by the computer to provide the exact amount of regenerant for each cleaning cycle. The regenerant system has a float and safety valve shut-off, which minimizes the chance of overflowing the regenerant tank. All units are equipped with an air check.
Regenerant Tank Included
A high density polyethylene 10″x16″ regenerant tank is included with this system. This tank is a combination saturator and regenerant storage vessel. Larger tanks are available for extra regenerant storage capacity
Quality You Can Trust
We have rigorous quality control standards that we adhere to when building all of our products
Energy Efficient
Electronically metered water flow allows the controller to make regeneration decisions based on water consumption & programming
Easily Combine Systems
This water system has the capability to be used in sequence with other water treatment technologies
System Models & Specifications
